Ramdev Ferro Alloys

We Ramdev Ferro Alloys is one of the leading Wholesale trader of Stainless Steel Angle. Our offered bar are developed in different sizes and other specifications by our vendors to meet the diverse requirements of customers. Moreover, these bar are offered to our customers at industry leading prices.

We provide All GRADE(304, 316, 202 etc.) all size (20x20 to 150x150), all thikness (3mm to 16mm) and all finish Stainless Steel angle in good pricing and quality.

Kindly connect us for more details.

Our Stainless Steel Angles are crafted from high-quality, corrosion-resistant stainless steel, ensuring durability and long-lasting performance across various applications. These angles are perfect for structural, industrial, and architectural uses, providing excellent strength, resistance to corrosion, and a sleek, modern finish

Stainless Steel 304 Angle Bar – Description

A Stainless Steel 304 Angle Bar is a long product with an “L-shaped” cross-section, made from austenitic stainless steel grade 304, which is the most widely used stainless steel due to its excellent corrosion resistance, good strength, and formability. Angle bars are commonly used for structural, architectural, and industrial applications.

Key Features:

• Grade: SS 304 (UNS S30400 / EN 1.4301)

• Shape: “L” shaped cross-section (equal or unequal legs)

• Finish: Hot rolled, cold drawn, pickled, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 304):

• Chromium (Cr): 18.0 – 20.0%

• Nickel (Ni): 8.0 – 10.5%

• Carbon (C): ≤ 0.08%

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.0%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: 515 MPa min

• Yield Strength (0.2% offset): 205 MPa min

• Elongation: 40% min

• Hardness: 201 HB max

Types of Angle Bars:

• Equal Angle: Both legs of equal length (e.g., 50×50 mm)

• Unequal Angle: Legs of different lengths (e.g., 50×30 mm)

Applications:

• Structural frameworks

• Support brackets & reinforcements

• Construction & building materials

• Industrial equipment & machinery

• Railings, shelves, and decorative architecture

• Marine & chemical applications (moderate resistance)

Stainless Steel 304L Angle Bar – Description

Stainless Steel 304L Angle Bar is an L-shaped long product made from low-carbon stainless steel grade 304L. The “L” in 304L stands for Low Carbon (≤0.03%), which provides excellent resistance to intergranular corrosion after welding, making it suitable for welded structures and applications requiring high corrosion resistance.

Key Features:

• Grade: SS 304L (UNS S30403 / EN 1.4307)

• Shape: “L” shaped cross-section (equal or unequal legs)

• Finish Options: Hot rolled, pickled, cold drawn, polished, mill finish

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 304L):

• Chromium (Cr): 18.0 – 20.0%

• Nickel (Ni): 8.0 – 12.0%

• Carbon (C): ≤ 0.03% (lower than 304)

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.0%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: 485 MPa min

• Yield Strength (0.2% offset): 170 MPa min

• Elongation: 40% min

• Hardness: 170 HB max

Types of Angle Bars:

• Equal Angle: Both legs of equal size (e.g., 50×50 mm)

• Unequal Angle: Different leg sizes (e.g., 75×50 mm)

Advantages of 304L over 304:

• Better weldability (reduced carbide precipitation in the heat-affected zone)

• Enhanced resistance to intergranular corrosion

• Preferred for welded structures and pressure vessels

Applications:

• Chemical & food processing equipment

• Welded structures & frameworks

• Architectural & decorative use

• Marine fittings (moderate chloride resistance)

• Support brackets, shelves, and reinforcements

• Piping support and fabrication

⚖️ 304 vs 304L:

• 304 → Higher strength, standard carbon content.

• 304L → Lower carbon, better weldability & corrosion resistance after welding.

Stainless Steel 304L Angle – Description

A Stainless Steel 304L Angle is an L-shaped long product made from low-carbon austenitic stainless steel (Grade 304L). The reduced carbon content (≤0.03%) minimizes carbide precipitation during welding, giving it excellent resistance to intergranular corrosion and making it highly suitable for welded structures.

Key Features:

• Grade: SS 304L (UNS S30403 / EN 1.4307)

• Shape: “L” profile (available in equal and unequal angles)

• Finish Options: Hot rolled, pickled, cold drawn, or polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical):

• Chromium (Cr): 18 – 20%

• Nickel (Ni): 8 – 12%

• Carbon (C): ≤ 0.03%

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.0%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ≥ 485 MPa

• Yield Strength (0.2% offset): ≥ 170 MPa

• Elongation: ≥ 40%

• Hardness: ≤ 170 HB

Types of 304L Angles:

• Equal Angle: Both legs same length (e.g., 50×50 mm)

• Unequal Angle: Different leg lengths (e.g., 65×50 mm)

Applications:

• Welded frames and structural supports

• Chemical & food processing equipment

• Architectural and decorative structures

• Marine and coastal components (moderate resistance to chlorides)

• Brackets, reinforcement, and fabrication works

⚖️ 304 vs 304L:

• 304 → Standard carbon, higher strength.

• 304L → Low carbon, better weldability, superior corrosion resistance after welding.

Stainless Steel 202 Angle Bar – Description

A Stainless Steel 202 Angle Bar is an L-shaped structural bar manufactured from austenitic stainless steel grade 202. This grade is an economical alternative to 304, containing lower nickel (4–6%) and higher manganese (7.5–10%). It provides good strength, toughness, and moderate corrosion resistance, making it suitable for indoor structures, fabrication, and decorative applications.

Key Features:

• Grade: SS 202 (UNS S20200 / EN 1.4373)

• Shape: “L” profile (available in equal and unequal types)

• Finish Options: Hot rolled, pickled, cold drawn, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 202):

• Chromium (Cr): 17 – 19%

• Nickel (Ni): 4 – 6%

• Manganese (Mn): 7.5 – 10%

• Nitrogen (N): ≤ 0.25%

• Carbon (C): ≤ 0.15%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ~ 515 – 750 MPa

• Yield Strength (0.2% offset): ~ 275 MPa

• Elongation: ~ 40%

• Hardness: ~ 217 HB max

Types of 202 Angle Bars:

• Equal Angle: Both legs are equal (e.g., 50×50 mm)

• Unequal Angle: Legs of different lengths (e.g., 65×40 mm)

Applications:

• Furniture and railings

• Architectural trims and decorative works

• Light structural fabrication

• Kitchenware and appliances

• Automotive body parts

• General indoor construction

⚖️ 202 vs 201 vs 304:

• 201 → Slightly higher carbon, good strength, used in economy applications.

• 202 → Better toughness and formability than 201, still cost-effective.

• 304 → Higher corrosion resistance, suitable for food-grade and outdoor use.

Stainless Steel 202 Angle – Description

A Stainless Steel 202 Angle is an L-shaped structural section produced from austenitic stainless steel grade 202. This grade is an economical substitute for 304, designed with reduced nickel (4–6%) and higher manganese (7.5–10%), offering good strength, toughness, and moderate corrosion resistance.

Key Features:

• Grade: SS 202 (UNS S20200 / EN 1.4373)

• Profile: “L” shaped angle, available in equal and unequal leg dimensions

• Finish Options: Hot rolled, pickled, cold drawn, polished, mill finish

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical):

• Chromium (Cr): 17 – 19%

• Nickel (Ni): 4 – 6%

• Manganese (Mn): 7.5 – 10%

• Carbon (C): ≤ 0.15%

• Nitrogen (N): ≤ 0.25%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: 515 – 750 MPa

• Yield Strength (0.2% offset): ~ 275 MPa

• Elongation: ~ 40%

• Hardness: ≤ 217 HB

Types of 202 Angles:

• Equal Angle: Both legs equal (e.g., 50×50 mm)

• Unequal Angle: Different leg lengths (e.g., 65×40 mm)

Applications:

• Furniture frames and decorative railings

• Indoor architectural use

• Kitchen equipment and utensils

• Light structural fabrication

• Automotive and railway components

• General construction where cost-effectiveness is important

⚖️ 202 vs 304 Stainless Steel Angles:

• 202 → More economical, good strength, but lower corrosion resistance (best for indoor or mild environments).

• 304 → Superior corrosion resistance, suitable for food-grade and outdoor applications.

Stainless Steel 310 Angle Bar – Description

A Stainless Steel 310 Angle Bar is an L-shaped structural bar made from heat-resistant austenitic stainless steel grade 310 (UNS S31000 / EN 1.4841). This grade contains a high percentage of chromium (24–26%) and nickel (19–22%), which provides excellent oxidation resistance, high-temperature strength, and superior corrosion resistance compared to 304/316.

It is especially used in furnaces, kilns, heat treatment equipment, and environments exposed to extreme heat and scaling.

Key Features:

• Grade: SS 310 (also available as 310S – low carbon version)

• Profile: “L” shaped (equal or unequal angle)

• Finish Options: Hot rolled, pickled, cold drawn, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 310):

• Chromium (Cr): 24 – 26%

• Nickel (Ni): 19 – 22%

• Carbon (C): ≤ 0.25% (310S ≤ 0.08%)

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.5%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ~ 520 MPa

• Yield Strength (0.2% offset): ~ 205 MPa

• Elongation: ~ 40%

• Hardness: ~ 217 HB max

Types of Angle Bars:

• Equal Angle: Both legs equal (e.g., 50×50 mm)

• Unequal Angle: Different leg sizes (e.g., 75×50 mm)

Applications:

• Furnace and kiln structural supports

• Heat exchangers and boilers

• Chemical processing equipment

• High-temperature conveyor systems

• Power plants and refineries

• Architectural structures requiring heat resistance

⚖️ 310 vs 304 / 316 Angles:

• 304 / 316 → General corrosion resistance, not ideal for continuous high temperatures.

• 310 → Superior oxidation & heat resistance (up to 1150–1200°C), ideal for high-temperature industrial use.

Stainless Steel 310 Angle – Description

A Stainless Steel 310 Angle is an L-shaped structural section made from austenitic stainless steel grade 310 (UNS S31000 / EN 1.4841). This grade is specially designed for high-temperature applications, thanks to its high chromium (24–26%) and nickel (19–22%) content, which gives it excellent oxidation resistance, superior scaling resistance, and good strength at elevated temperatures.

A low-carbon version, 310S, is also available to minimize carbide precipitation during welding.

Key Features:

• Grade: SS 310 / 310S

• Shape: “L” angle (equal and unequal types)

• Finish Options: Hot rolled, pickled, cold drawn, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical):

• Chromium (Cr): 24 – 26%

• Nickel (Ni): 19 – 22%

• Carbon (C): ≤ 0.25% (310S ≤ 0.08%)

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.5%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ~ 520 MPa

• Yield Strength (0.2% offset): ~ 205 MPa

• Elongation: ~ 40%

• Hardness: ≤ 217 HB

Types of 310 Angles:

• Equal Angle: Both legs the same size (e.g., 50×50 mm)

• Unequal Angle: Different leg lengths (e.g., 65×40 mm)

Applications:

• Furnace and kiln frameworks

• Heat treatment equipment

• Power plant & refinery structures

• High-temperature conveyors & supports

• Boilers and incinerators

• Chemical & petrochemical industries

⚖️ 310 vs 304/316 Angles:

• 304/316 → Great for corrosion resistance in normal/marine environments.

• 310 → Best for extreme heat resistance (up to ~1150–1200°C).

Stainless Steel 201Angle Bar – Description

A Stainless Steel 304 Angle Bar is a long product with an “L-shaped” cross-section, made from austenitic stainless steel grade 201 which is the most widely used stainless steel due to its excellent corrosion resistance, good strength, and formability. Angle bars are commonly used for structural, architectural, and industrial applications.

Key Features:

• Grade: SS 201(UNS S30400 / EN 1.4301)

• Shape: “L” shaped cross-section (equal or unequal legs)

• Finish: Hot rolled, cold drawn, pickled, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 304):

• Chromium (Cr): 18.0 – 20.0%

• Nickel (Ni): 8.0 – 10.5%

• Carbon (C): ≤ 0.08%

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.0%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: 515 MPa min

• Yield Strength (0.2% offset): 205 MPa min

• Elongation: 40% min

• Hardness: 201 HB max

Types of Angle Bars:

• Equal Angle: Both legs of equal length (e.g., 50×50 mm)

• Unequal Angle: Legs of different lengths (e.g., 50×30 mm)

Applications:

• Structural frameworks

• Support brackets & reinforcements

• Construction & building materials

• Industrial equipment & machinery

• Railings, shelves, and decorative architecture

• Marine & chemical applications (moderate resistance)

Stainless Steel 201 Angle Bar – Description

A Stainless Steel 201 Angle Bar is an L-shaped structural product made from austenitic stainless steel grade 201. This grade is a low-nickel, high-manganese stainless steel, developed as a cost-effective alternative to 304. It offers good strength and hardness, with moderate corrosion resistance, suitable for indoor, decorative, and light structural applications.

Key Features:

• Grade: SS 201 (UNS S20100 / EN 1.4372)

• Shape: “L” shaped (available in equal and unequal angles)

• Finish Options: Hot rolled, pickled, cold drawn, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 201):

• Chromium (Cr): 16 – 18%

• Nickel (Ni): 3.5 – 5.5% (lower than 304)

• Manganese (Mn): 5.5 – 7.5%

• Nitrogen (N): ≤ 0.25%

• Carbon (C): ≤ 0.15%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ~ 750 MPa

• Yield Strength (0.2% offset): ~ 275 MPa

• Elongation: ~ 40%

• Hardness: ~ 217 HB max

Types of 201 Angle Bars:

• Equal Angle: Both legs same length (e.g., 40×40 mm)

• Unequal Angle: Different leg sizes (e.g., 50×30 mm)

Applications:

• Decorative and architectural applications

• Furniture, railings, and trims

• Light structural frameworks

• Kitchen equipment & appliances

• Indoor fabrication works

• Automotive and railway components

⚖️ 201 vs 304 vs 316:

• 201 → More economical, lower nickel, higher manganese, good strength, moderate corrosion resistance.

• 304 → Higher corrosion resistance, widely used, food-grade.

• 316 → Best resistance to chlorides/marine environments, premium quality.

Stainless Steel 316 Angle Bar – Description

A Stainless Steel 316 Angle Bar is an L-shaped structural product made from austenitic stainless steel grade 316, which is known for its superior corrosion resistance, especially against chlorides, acids, and marine environments. The addition of molybdenum (Mo 2–3%) makes it more resistant to pitting and crevice corrosion compared to 304/304L grades.

Key Features:

• Grade: SS 316 (UNS S31600 / EN 1.4401)

• Shape: “L” shaped (equal or unequal angle)

• Finish Options: Hot rolled, pickled & annealed, cold drawn, polished

• Standards: ASTM A276 / A484, ASME SA276, EN, DIN, JIS

Chemical Composition (Typical 316):

• Chromium (Cr): 16 – 18%

• Nickel (Ni): 10 – 14%

• Molybdenum (Mo): 2 – 3%

• Carbon (C): ≤ 0.08%

• Manganese (Mn): ≤ 2.0%

• Silicon (Si): ≤ 1.0%

• Iron (Fe): Balance

Mechanical Properties:

• Tensile Strength: ≥ 515 MPa

• Yield Strength (0.2% offset): ≥ 205 MPa

• Elongation: ≥ 40%

• Hardness: ≤ 217 HB

Types of Angle Bars:

• Equal Angle: Both legs of equal length (e.g., 50×50 mm)

• Unequal Angle: Different leg lengths (e.g., 65×40 mm)

Applications:

• Marine & coastal structures

• Chemical & pharmaceutical equipment

• Oil & gas industry components

• Structural supports and frameworks

• Food processing plants

• Heat exchangers and pressure vessels

• Architectural applications where strength + appearance matter

⚖️ Difference vs 304/304L Angles:

• 304/304L → Good general corrosion resistance, economical.

• 316 → Better chloride resistance (marine, chemicals), higher durability.